| MAKE | MODEL | CHASSIS | SYMPTOM | CURE | |
| MAGNAVOX | RK8540 | PTV355 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| MAGNAVOX | RK8540 | PTV355 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| MAGNAVOX | RK8540 | PTV355 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| MAGNAVOX | RK8540 | PTV355 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| MAGNAVOX | RK8540 | PTV355 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| MAGNAVOX | RK8540 | PTV355 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| MAGNAVOX | RK8540 | PTV355 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| MAGNAVOX | RK8548 | N/A | NO AUDIO OR VERY LOW AUDIO | CHECK/REPLACE Q203 AND Q204 (FET) | |
| MAGNAVOX | RK8548 | N/A | DIAGONAL LINES AND DOTS IN THE PIX | CHECK/REPLACE C443 (002508694705) CHECK TO SEE THAT VALUE IS 47pF | |
| MAGNAVOX | RK8548 | PTV365 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| MAGNAVOX | RK8548 | PTV365 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| MAGNAVOX | RK8548 | PTV365 | LOW OR NO AUDIO FROM ONE OR BOTH CHANNELS | CHECK Q203 AND Q204 (FET) STEREO AMP. BOARD | |
| MAGNAVOX | RK8548 | PTV365 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| MAGNAVOX | RK8548 | PTV365 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| MAGNAVOX | RK8548 | PTV365 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| MAGNAVOX | RK8548 | PTV365 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| MAGNAVOX | RK8548 | PTV365 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| MAGNAVOX | RK8548 | PTV365 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| MAGNAVOX | RK8548 | PTV365 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| MAGNAVOX | RK8548 | PTV365 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| MAGNAVOX | RK8550 | PTV340 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| MAGNAVOX | RK8550 | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| MAGNAVOX | RK8550 | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| MAGNAVOX | RK8550 | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| MAGNAVOX | RK8550 | PTV340 | LOSS OF ONE COLOR TO LOSS OF VIDEO | INST. .01uF AT JUMPER B803 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET --CHECK Q501 TO GROUND FOR SHORTS | REPLACE Q501--CHECK CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET - NO SOUND OR PICTURE INTERMITTENTLY | CHECK/REPLACE IC403 (5 VOLT REGULATOR) | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| MAGNAVOX | RK8550 | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| MAGNAVOX | RK8550 | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| MAGNAVOX | RK8550 | PTV340 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| MAGNAVOX | RK8550 | PTV340 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| MAGNAVOX | RK8550 | PTV340 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| MAGNAVOX | RK8550 | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET OR NO B+ REGULATION | CHECK/RESOLDER CONNECTIONS BETWEEN TP8 AND C30 (PWR.SUP.) | |
| MAGNAVOX | RK8550 | PTV340 | SET SHUTS DOWN 15 SECONDS AFTER TURN ON | CHECK/REPLACE Z503 (8.2V ZENER) | |
| MAGNAVOX | RK8550 | PTV340 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| MAGNAVOX | RK8550 | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| MAGNAVOX | RK8550 | PTV340 | NO PICTURE OR HIGH VOLTAGE BUT DOES HAVE SOUND | CHECK/REPLACE IC550 AND R552 | |
| MAGNAVOX | RK8550 | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET --CHECK Q501 TO GROUND FOR SHORTS | REPLACE Q501--CHECK CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| MAGNAVOX | RK8550 | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE Q203 AND Q204 (MUTING FET'S) | |
| MAGNAVOX | RK8550 | PTV340 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8550 | PTV340 | NUISANCE SHUTDOWN | REPLACE DEFLECTION MODULE AND ALL 3 CRT BOARDS | |
| MAGNAVOX | RK8550 | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| MAGNAVOX | RK8550 | PTV340 | PLAYS FOR ABOUT 15 MINUTES THEN SHUTS OFF - ALSO SHUTS OFF WHEN CHANNELS ARE CHANGED. | CHECK/REPLACE Z460 | |
| MAGNAVOX | RK8550 | PTV340 | BLACK STRIPE DOWN LEFT SIDE OF PICTURE | CHECK/REPLACE IC200 | |
| MAGNAVOX | RK8550 | PTV340 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| MAGNAVOX | RK8550 | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE MUTING TRANSISTORS Q203 AND Q204 | |
| MAGNAVOX | RK8550 | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| MAGNAVOX | RK8550 | PTV340 | ON SCREEN CLOCK LOSES 15 TO 20 MINUTES PER DAY | CHECK IC303 PIN 2 FOR 32.768KHZ AND ADJUST C340 FOR PROPER FREQUENCY. | |
| MAGNAVOX | RK8550 | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| MAGNAVOX | RK8550 | PTV340 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| MAGNAVOX | RK8550 | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| MAGNAVOX | RK8550 | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| MAGNAVOX | RK8550 | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| MAGNAVOX | RK8550 | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| MAGNAVOX | RK8550 | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| MAGNAVOX | RK8550 | PTV340 | DEAD SET OR NO B+ REGULATION | CHECK/RESOLDER CONNECTIONS BETWEEN TP8 AND C30 (PWR.SUP.) | |
| MAGNAVOX | RK8550 | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| MAGNAVOX | RK8550 | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| MAGNAVOX | RK8558 | PTV350 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| MAGNAVOX | RK8558 | PTV350 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| MAGNAVOX | RK8558 | PTV350 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| MAGNAVOX | RK8558 | PTV350 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| MAGNAVOX | RK8558 | PTV350 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8558 | PTV350 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| MAGNAVOX | RK8558 | PTV350 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| MAGNAVOX | RK8558 | PTV350 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| MAGNAVOX | RK8558 | PTV350 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| MAGNAVOX | RK8558 | PTV350 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| MAGNAVOX | RK8558 | PTV350 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| MAGNAVOX | RK8558 | PTV350 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| MAGNAVOX | RK8558 | PTV350 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| MAGNAVOX | RK8558 | PTV350 | LOW OR NO AUDIO FROM ONE OR BOTH CHANNELS | CHECK Q203 AND Q204 (FET) STEREO AMP. BOARD | |
| MAGNAVOX | RK8558 | PTV350 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| MAGNAVOX | RK8560 | PTV355 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| MAGNAVOX | RK8560 | PTV355 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| MAGNAVOX | RK8560 | PTV355 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| MAGNAVOX | RK8560 | PTV355 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| MAGNAVOX | RK8560 | PTV355 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| MAGNAVOX | RK8560 | PTV355 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| MAGNAVOX | RK8560 | PTV355 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| MAGNAVOX | RK8560 | PTV355 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| MAGNAVOX | RK8560 | PTV355 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| MAGNAVOX | RK8560 | PTV355 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| MAGNAVOX | RK8568 | PTV365 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| MAGNAVOX | RK8568 | PTV365 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| MAGNAVOX | RK8568 | PTV365 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| MAGNAVOX | RK8568 | PTV365 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| MAGNAVOX | RK8568 | PTV365 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| MAGNAVOX | RK8568 | PTV365 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| MAGNAVOX | RK8568 | PTV365 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| MAGNAVOX | RK8568 | PTV365 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| MAGNAVOX | RK8568 | PTV365 | LOW OR NO AUDIO FROM ONE OR BOTH CHANNELS | CHECK Q203 AND Q204 (FET) STEREO AMP. BOARD | |
| MAGNAVOX | RK8568 | PTV365 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| MAGNAVOX | RK8568 | PTV365 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| MITSUBISHI | CS3103 | N/A | INTERMIT.HORIZONTAL STREAKS IN THE PICTURE | CHECK DL2A2 | |
| MITSUBISHI | CS3103 | N/A | FLASHING PIX-HUM BAR IN PIX | CHECK FOR OPEN PLL OR PSC CABLES | |
| MITSUBISHI | CS3103 | N/A | DARK PIX-OSD IS BLACK AND NO GREEN DRIVE | CHECK R657 (180k) ON CRT BOARD FOR OPEN | |
| MITSUBISHI | CS3103 | N/A | INTERMITTENT HORIZON. STREAKS IN THE PICTURE | COMES AND GOES WHEN PCB IS FLEXED INTERMITTENT DELAY | |
| MITSUBISHI | CS3103 | N/A | WIDTH PULSATES WITH BRIGHTNESS CHANGES | CHECK/REPLACE IC901 (P/N# 272P255010) | |
| MITSUBISHI | CS3103R | N/A | NO CHROMA IN MAIN OR PIP PICTURE | CHECK/REPLACE C7198 FOR SHORT | |
| MITSUBISHI | CS40307 | N/A | HORZ. CENTERING NOT WORKING | CHECK/REPLACE IC2V01 (P/N# 270P347010) | |
| MITSUBISHI | CS40503 | N/A | GHOSTING TO THE RIGHT OF IMAGES | CHECK/REPLACE C207 (1000uF @ 16v) | |
| MITSUBISHI | CS40503 | N/A | NO VIDEO WHEN SET IS COLD | CHECK/REPLACE D251 (P/N# 264P045040) | |
| MITSUBISHI | CS40503 | N/A | INTERMITTENT VIDEO AND NO OSD | CHECK/REPLACE D7Q1 (P/N# 264P502030) | |
| MITSUBISHI | CS40503 | N/A | AUDIBLE SQUEAL WHEN SCENES CHANGES | CHECK/REPLACE T522 (P/N# 349P122050) | |
| MITSUBISHI | CS40505 | N/A | WHITE LETTERING CAUSES THE PICTURE TO PULL TO THE RIGHT | CHECK/REPLACE C5A3 (0.1uF @ 50v NP) | |
| MITSUBISHI | TS4553 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | TS4553 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | TS4557 | N/A | NO VERTICAL DEFLECTION | CHECK/REPLACE IC9A2 (P/N# 267P076010) | |
| MITSUBISHI | TS5053 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | TS5053 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | TS5057 | N/A | GREEN PICTURE WITH RETRACE LINES - INTERMITTENT PROBLEM | CHECK/REPLACE L6A1 (P/N# 325C307020) | |
| MITSUBISHI | TS5087 | N/A | INCORRECT OPERATION OF ACTIVE A/V & STARSIGHT FUNCTIONS | CHECK/REPLACE Q718 (MUST BE P/N# 260P806010) MUST BE DTA124EK OR UN2112 | |
| MITSUBISHI | VS360R | N/A | LOW AGC VOLTAGE | CHECK/REPLACE C103 | |
| MITSUBISHI | VS363 | N/A | ONE FOURTH OF THE SCREEN HAS POOR CONVERGENCE | CHECK/REPLACE IC8A0 AND IC8A1 (STK4273) | |
| MITSUBISHI | VS363 | N/A | MIS-CONVERGED AND CUSTOMER CTRL.HAVE NO EFFECT | CHECK Q8B6 AND Q8E1 OR CONNECTIONS | |
| MITSUBISHI | VS4001 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4001R | N/A | RETRACE LINES ON MENU ONLY | CHECK/REPLACE D216 (P/N# 264P460060) | |
| MITSUBISHI | VS4001R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS4001R | N/A | SET GOES INTO SHUTDOWN | CHECK/REPLACE Q504 (P/N# 260P560040) | |
| MITSUBISHI | VS4001R | N/A | SET SHUTS DOWN WHEN POWERED UP | CHECK/REPLACE IC8000 (P/N# 267P842010), C8004 (100uF @ 25v) AND L8001/L8002 (P/N# 321C031040) | |
| MITSUBISHI | VS4002 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4002R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS4002R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS4002R | V10B | NO VIDEO | CHECK/REPLACE C2H0 AT THE EMITTER OF Q232 FOR SHORT. | |
| MITSUBISHI | VS4002R | V10B | DEAD SET BUT RELAY CLICKS | CHECK/REPLACE IC901 (P/N#272P255020),IC900 (P/N#267P063010) | |
| MITSUBISHI | VS4003 | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE C4003 | |
| MITSUBISHI | VS4003 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4003 | N/A | SET SHUTS DOWN | CHECK/REPLACE IC707 (266P931010) | |
| MITSUBISHI | VS4003 | V10B | VERY DARK SMEARY VIDEO - LOOKS LIKE CRT IS BAD | CHECK/REPLACE R511 (100 ohm) FOR OPEN | |
| MITSUBISHI | VS4003R | N/A | NO VIDEO OR OSD | CHECK/REPLACE R511 (100?1/2w) , PART OF CM-KIT | |
| MITSUBISHI | VS4003R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS4003R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS4003R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS4003R | V10B | DEAD SET BUT RELAY CLICKS | CHECK/REPLACE IC901 (P/N#272P255020),IC900 (P/N#267P063010) | |
| MITSUBISHI | VS4003R | V10B | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS4007 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4007R | N/A | NO GREEN FOCUS | CHECK/REPLACE R8810 (22k 1/2w) | |
| MITSUBISHI | VS401R | N/A | NO VIDEO OR AUDIO WHEN USED ON TUNER | CHECK/REPLACE Q104 FOR LEAKAGE (P/N# 260P338040) | |
| MITSUBISHI | VS403 | N/A | ONLY TUNES CHANNELS 23 AND ABOVE - POOR CONVERGENCE WITH NO MOVEMENT ON CUSTOMER CONTROLS. | CHECK FOR A BLOWN FUSE F8A0 ON CONVERGENCE BOARD | |
| MITSUBISHI | VS403R | N/A | WHITE SCREEN WITH RETRACE LINES | CHECK/REPLACE D204 FOR LEAKAGE | |
| MITSUBISHI | VS403R | N/A | VOLUME INCREASES OR LOSS OF VIDEO | CHECK/REMOVE GLUE FROM PINS 21 AND 22 OF IC701 (SIGNAL BD) | |
| MITSUBISHI | VS405 | N/A | ONLY TUNES CHANNELS 23 AND ABOVE - POOR CONVERGENCE WITH NO MOVEMENT ON CUSTOMER CONTROLS. | CHECK FOR A BLOWN FUSE F8A0 ON CONVERGENCE BOARD | |
| MITSUBISHI | VS40VA2 | N/A | ONE PRIMARY COLOR TOO BRIGHT WITH RETRACE LINES - SCREEN CONTROL WILL NOT GO LOW ENOUGH | CHECK/REPLACE R6H3 (RED), R6H4 (GREEN) OR R6H5 (BLUE) | |
| MITSUBISHI | VS40VA2 | N/A | CLOCK LOSES OR GAINS TIME | INSTALL CLOCK KIT COMPONENTS (P/N# VZ-CLOCK-KIT) | |
| MITSUBISHI | VS40VA2 | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS412RS | N/A | SEVERE KEYSTONE RASTER | CHECK/REPLACE R8A2 AND C8A6 ON CONVERGENCE BOARD | |
| MITSUBISHI | VS412RS | N/A | SEVERE KEYSTONE RASTER | CHECK/REPLACE R8A2 (100k) AND C8A6 (22uF @ 25v) | |
| MITSUBISHI | VS414 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS414 | N/A | NO SCREEN CONTROL | CHECK/REPLACE R511 (100 ohm 1/2w)FOR OPEN | |
| MITSUBISHI | VS414 | N/A | NO VIDEO,NO SOUND,BLANK RASTER EXCEPT FOR O.S.D. | CHECK ORANGE WIRE CONNECTED TO JUNCTION OF D4C1 AND | |
| MITSUBISHI | VS414 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS414 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS416R | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE D407 FOR LEAKAGE (264P28501) | |
| MITSUBISHI | VS4501 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4501R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS4501R | N/A | NO VIDEO OR CHROMA | CHECK/REPLACE Q231 FOR SHORT (P/N# 260P338040) | |
| MITSUBISHI | VS4501R | N/A | NO VIDEO | CHECK/REPLACE L706 FOR OPEN | |
| MITSUBISHI | VS4502 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4502R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS4502R | N/A | POOR FOCUS DURING WARM UP | CHECK/REPLACE C5000 (0.056 F @ 50v) | |
| MITSUBISHI | VS4502R | N/A | PICTURE IS BOWED AT THE TOP | CHECK/REPLACE C4A1 (0.39uF @ 200v) | |
| MITSUBISHI | VS4502R | N/A | POOR FOCUS DURING WARM UP | CHECK/REPLACE C5000 (0.056uF @ 50v) | |
| MITSUBISHI | VS4502R | N/A | NOISY AUDIO ON SOME CHANNELS | CHECK/REPLACE SF301 (296P092010) | |
| MITSUBISHI | VS4502R | N/A | PICTURE IS BOWED | CHECK/REPLACE C5A6 (4.7uF @ 50v) | |
| MITSUBISHI | VS4503 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4503R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS4503R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS4503R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS4503R | V10B | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS4504 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS4504R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS4504R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS4504R | N/A | RETRACE LINES IN THE MENUS ONLY | CHECK/REPLACE C4006 (100uF @ 35v) | |
| MITSUBISHI | VS4504R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS4504R | V10B | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS4506 | N/A | +12 VOLT AND +16 VOLT SUPPLIES ARE BOTH HIGH | CHECK/REPLACE C920 (10uF @ 100v) OPEN | |
| MITSUBISHI | VS4506 | N/A | POOR FOCUS | CHECK/REPLACE LENSE ASSEMBLY - THESE HAVE BEEN KNOWN TO SHIFT OR BECOME LOOSE IN SHIPPING. | |
| MITSUBISHI | VS4507 | N/A | POOR FOCUS | CHECK/REPLACE LENSE ASSEMBLY - THESE HAVE BEEN KNOWN TO SHIFT OR BECOME LOOSE IN SHIPPING. | |
| MITSUBISHI | VS4507R | N/A | R791 AND R792 OVER-HEAT | CHECK POSITION OF S200 - IT SHOULD BE IN THE CENTER | |
| MITSUBISHI | VS4507R | N/A | NO VIDEO | CHECK/REPLACE C257 (10uF @ 50v) | |
| MITSUBISHI | VS4517 | N/A | TOP AND BOTTOM PINCUSHION DISTORTION | CHECK/REPLACE VR4A02 AND C4A04 FOR PARTIAL OPEN | |
| MITSUBISHI | VS452R | N/A | PICTURE IS PULLED IN ON THE LEFT SIDE | CHECK/REPLACE C555 | |
| MITSUBISHI | VS452R | N/A | PICTURE PULLED IN ON THE LEFT SIDE | CHECK/REPLACE C555 | |
| MITSUBISHI | VS4543 | N/A | REPEATURE FAILURE OF Q5A00 | CHECK/REPLACE Q5A00 AND L5A00 (P/N# 351P138020) | |
| MITSUBISHI | VS4551 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | VS4551 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | VS4552 | N/A | BLUE CONVERGENCE JITTERS | CHECK/REPLACE Q8F02 (P/N# 260P560040) | |
| MITSUBISHI | VS4552 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | VS4552 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | VS4561 | N/A | NO RED | CHECK/REPLACE R6C0 (100 1/4w) | |
| MITSUBISHI | VS4561 | N/A | HUM IN AUDIO | REMOVE JUMPER #239, ADD A WIRE FROM JUMPER #40 TO THE HEAT SINK MOUNTING TABS FOR IC300 | |
| MITSUBISHI | VS4562 | N/A | HUM IN AUDIO | REMOVE JUMPER #239, ADD A WIRE FROM JUMPER #40 TO THE HEAT SINK MOUNTING TABS FOR IC300 | |
| MITSUBISHI | VS457 | N/A | PICTURE TEARS WHEN USING THE TUNER INPUT | CHECK/REPLACE C103 | |
| MITSUBISHI | VS4571 | N/A | NO GREEN IN THE PICTURE | CHECK/REPLACE Q6A5 (P/N# 260P571010) | |
| MITSUBISHI | VS4571 | N/A | RED VERTICAL LINE ON THE RIGHT SIDE ON PAY CHANNELS | ADD 560pF CAPACITOR ACROSS R2L1 | |
| MITSUBISHI | VS458S | N/A | NO VIDEO AND NO OSD | CHECK/REPLACE R441 (4.7k 1/2w) | |
| MITSUBISHI | VS459R | N/A | NO CONTROL OF CONVERGENCE | CHECK/REPLACE C8E0 (100uF @ 25v) AND F8A0 & F8A1 | |
| MITSUBISHI | VS45VA1 | N/A | CLOCK LOSES OR GAINS TIME | INSTALL CLOCK KIT COMPONENTS (P/N# VZ-CLOCK-KIT) | |
| MITSUBISHI | VS45VA1 | N/A | ONE PRIMARY COLOR TOO BRIGHT WITH RETRACE LINES - SCREEN CONTROL WILL NOT GO LOW ENOUGH | CHECK/REPLACE R6H3 (RED), R6H4 (GREEN) OR R6H5 (BLUE) | |
| MITSUBISHI | VS45VA1 | N/A | REMOTE IS INOPERATIVE | CHECK/REPLACE R758 (100 1/4w) | |
| MITSUBISHI | VS45VA1 | N/A | PICTURE PULLED IN ON ONE SIDE | CHECK/REPLACE C5A1 AND C5A2 | |
| MITSUBISHI | VS45VA1 | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS45VA2 | N/A | NO OSD | CHECK/REPLACE C2S4 (330uF/50v) | |
| MITSUBISHI | VS45VA2 | N/A | CLOCK LOSES OR GAINS TIME | INSTALL CLOCK KIT COMPONENTS (P/N# VZ-CLOCK-KIT) | |
| MITSUBISHI | VS45VA2 | N/A | EXTERNAL VIDEO INPUTS ON REAR DO NOT WORK | CHECK/REPLACE R786 (100 ) | |
| MITSUBISHI | VS45VA2 | N/A | ONE PRIMARY COLOR TOO BRIGHT WITH RETRACE LINES - SCREEN CONTROL WILL NOT GO LOW ENOUGH | CHECK/REPLACE R6H3 (RED), R6H4 (GREEN) OR R6H5 (BLUE) | |
| MITSUBISHI | VS45VA2 | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS45VA2CA | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS460 | V7 | RED OR BLUE CONVERGENCE OUT AND UNABLE TO ADJUST | CHECK/REPLACE IC8A0 AND/OR IC8A1, ALSO C8A5 & C8A6 | |
| MITSUBISHI | VS460 | V7 | ONLY TUNES CHANNELS 23 AND ABOVE - POOR CONVERGENCE WITH NO MOVEMENT ON CUSTOMER CONTROLS. | CHECK FOR A BLOWN FUSE F8A0 ON CONVERGENCE BOARD | |
| MITSUBISHI | VS461 | N/A | CONVERGENCE CHANGES INTERMITTENTLY | CHECK/RESOLDER CONNECTIONS ON Q8E1 AND Q8E2 | |
| MITSUBISHI | VS462 | V7 | RED OR BLUE CONVERGENCE OUT AND UNABLE TO ADJUST | CHECK/REPLACE IC8A0 AND/OR IC8A1, ALSO C8A5 & C8A6 | |
| MITSUBISHI | VS463R | N/A | NO AUDIO | CHECK/REPLACE IC713 | |
| MITSUBISHI | VS464 | N/A | POOR WHITE BALANCE | CHECK/REPLACE IC713 (272P162010) | |
| MITSUBISHI | VS466 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS466 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS466 | N/A | BLUE HORZ. FOLDOVER | CHECK/REPLACE R812 (6.8 2w) | |
| MITSUBISHI | VS466 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS466R | N/A | KEYBOARD INOPERATIVE | CHECK/REPLACE IC7700 (P/N# 263P798010) | |
| MITSUBISHI | VS466R | N/A | NOISY VIDEO | CHECK/REPLACE R2J8 (1 MEG) FOR CHANGE IN VALUE | |
| MITSUBISHI | VS466R | N/A | FRONT PANEL KEYBOARD INOPERATIVE | CHECK/REPLACE IC7700 (P/N# 262P798010) | |
| MITSUBISHI | VS466RS | N/A | VIDEO SMEAR WITH TRAILING BLACK SHADOWS | CHECK/REPLACE C231 (3.3uF @ 50v) | |
| MITSUBISHI | VS467 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS467 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS467 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS468 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS468 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS468 | N/A | SCREEN GOES DARK | CHECK/REPLACE D506 (P/N# 264P146010) | |
| MITSUBISHI | VS468 | V9 | ONLY TUNES CHANNELS 23 AND ABOVE - POOR CONVERGENCE WITH NO MOVEMENT ON CUSTOMER CONTROLS. | CHECK FOR A BLOWN FUSE F8A0 ON CONVERGENCE BOARD | |
| MITSUBISHI | VS468 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS468R | N/A | SCREEN GOES DARK | CHECK/REPLACE D506 (P/N# 264P146010) | |
| MITSUBISHI | VS470 | V7 | RED OR BLUE CONVERGENCE OUT AND UNABLE TO ADJUST | CHECK/REPLACE IC8A0 AND/OR IC8A1, ALSO C8A5 & C8A6 | |
| MITSUBISHI | VS471 | V7 | RED OR BLUE CONVERGENCE OUT AND UNABLE TO ADJUST | CHECK/REPLACE IC8A0 AND/OR IC8A1, ALSO C8A5 & C8A6 | |
| MITSUBISHI | VS472 | V7 | RED OR BLUE CONVERGENCE OUT AND UNABLE TO ADJUST | CHECK/REPLACE IC8A0 AND/OR IC8A1, ALSO C8A5 & C8A6 | |
| MITSUBISHI | VS472R | N/A | NO AUDIO | CHECK/REPLACE F331 (SPECIAL TYPE P/N 283D03803) | |
| MITSUBISHI | VS5001 | N/A | INTERMITTENT FAILURE OF Q502 | CHECK/REPLACE C914 (47uF @ 100v) AND Q502 | |
| MITSUBISHI | VS5001 | N/A | HORIZONTAL OUTPUT FAILS IMMEDIATELY AT POWER UP | CHECK/REPLACE D920 FOR SHORT AS WELL AS THE HORZ. OUTPUT | |
| MITSUBISHI | VS5001 | N/A | INTERMITTENT CONVERGENCE | CHECK R718,R719,R720 AND R7F0 | |
| MITSUBISHI | VS5001 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5001R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS5002 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5002R | N/A | L801 OPEN AND C812 SHORTED | CHECK/REPLACE D958 (P/N# 264P358080),L801 AND C812 | |
| MITSUBISHI | VS5002R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS5003 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5003 | N/A | GOES INTO SHUTDOWN | CHECK/REPLACE D959 (P/N# 264P102040) | |
| MITSUBISHI | VS5003R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS5003R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS5003R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS5004 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5004R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS5004R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS5004R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS5004R | N/A | WHITE SMEARING IN PIX ON CHARACTERS AND BRIGHT SCENES | CHECK/REMOVE SILICONE FROM AROUND PIN 8 OF IC201 | |
| MITSUBISHI | VS5005 | N/A | GREEN PICTURE WITH RETRACE LINES | CHECK/REPLACE Q5A1 FOR OPEN (PCC OUTPUT XSTR.P/N 260P42002) | |
| MITSUBISHI | VS5005 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5005R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS5005R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS5005R | V11 | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS5006 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5006 | N/A | SET GOES INTO SHUTDOWN | CHECK/REPLACE R540 (P/N# 103P398010) 1.2 1/2w. | |
| MITSUBISHI | VS5006R | N/A | 130 VOLT SUPPLY IS LOW | CHECK/REPLACE D920 (P/N# 264P463010) 8.2v ZENER | |
| MITSUBISHI | VS5006R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS5006R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS5007 | N/A | INTERMITTENT VIDEO | CHECK/REPLACE IC2002 | |
| MITSUBISHI | VS5007 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5007R | N/A | INTERMITTENT VIDEO - OSD IS OK | CHECK/REPLACE IC7007 (266P934060) | |
| MITSUBISHI | VS5007R | N/A | SPOTS IN THE PICTURE | CHECK/REPLACE X2001 (P/N# 285P069020) | |
| MITSUBISHI | VS5007R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS5007R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS5010 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5010R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS5010R | N/A | BRIGHT SCREEN WITH RETRACE LINES | CHECK/REPLACE R505 AND D503 | |
| MITSUBISHI | VS5017 | N/A | TOP AND BOTTOM PINCUSHION DISTORTION | CHECK/REPLACE VR4A02 AND C4A04 FOR PARTIAL OPEN | |
| MITSUBISHI | VS5017S | N/A | TEST PATTERN LINES WILL NOT VARY | CHECK/REPLACE C8B8 (P/N# 149D811030) | |
| MITSUBISHI | VS5017S | N/A | WEAK VIDEO | CHECK/REPLACE D3203 (P/N# 264P63020) FOR LEAKAGE | |
| MITSUBISHI | VS5020 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5020 | N/A | DISTORTED PICTURE WITH LINES ON THE LEFT SIDE | CHECK/REPLACE IC208 | |
| MITSUBISHI | VS5020R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS5021 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS5021R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS5021R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS5021R | V11 | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS5051 | N/A | BLUE BOWING AT THE SIDES | CHECK/REPLACE Q8F02 (P/N# 260P560040) AND Q8F03 (P/N# 260P386010) | |
| MITSUBISHI | VS5051 | N/A | WILL NOT CONVERGE | CHECK/REPLACE Q8F04 (P/N# 260P651010) | |
| MITSUBISHI | VS5051 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | VS5051 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | VS5052 | N/A | PICTURE BOWS AT THE TOP AND BOTTOM | CHECK/REPLACE Q4B01 (P/N# 260P559050) | |
| MITSUBISHI | VS5052 | N/A | PICTURE GOES RED THEN SHUTS DOWN | CHECK/REPLACE R6G0 (2.2k?1/4w) ON THE CRT BOARD | |
| MITSUBISHI | VS5052 | N/A | PINCUSHION DISTORTION AT TOP OF SCREEN | CHECK/REPLACE C4B04 (33uF @ 50v) AND Q4B01 (P/N 260P559050) | |
| MITSUBISHI | VS5052 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | VS5052 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | VS5055 | N/A | BOW AT THE TOP AND BOTTOM OF THE PICTURE | CHECK/REPLACE R4B05 (220k 1/4w.) | |
| MITSUBISHI | VS5055 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | VS5055 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | VS5059 | N/A | WASHED OUT WHITE AREAS | CHECK/REPLACE R508 2.7?@ 2w (P/N# 103P438050) | |
| MITSUBISHI | VS5061 | N/A | NO POWER | CHECK/REPLACE R503 (3.9k 5watt) AND T500 (P/N# 336P009030) | |
| MITSUBISHI | VS5061 | N/A | NO VIDEO - DOES APPEAR WHEN PIP IS ACTIVATED | CHECK/REPLACE C763 (1uF @ 50v) | |
| MITSUBISHI | VS5061 | N/A | HUM IN AUDIO | REMOVE JUMPER #239, ADD A WIRE FROM JUMPER #40 TO THE HEAT SINK MOUNTING TABS FOR IC300 | |
| MITSUBISHI | VS5061 | N/A | AUDIO BUZZ | CHECK/REPLACE R6G6 (6.8?@ 1w) | |
| MITSUBISHI | VS5061 | N/A | CHANNELS WON'T LOCK | CHECK/REPLACE Q104 (P/N# 260P559030) | |
| MITSUBISHI | VS5061 | N/A | GREEN PICTURE WITH RETRACE | CHECK/REPLACE R6H4 (2.2meg?@ 1/2w) | |
| MITSUBISHI | VS5062 | N/A | HUM IN AUDIO | REMOVE JUMPER #239, ADD A WIRE FROM JUMPER #40 TO THE HEAT SINK MOUNTING TABS FOR IC300 | |
| MITSUBISHI | VS5062 | N/A | NO POWER | CHECK/REPLACE R503 (3.9k 5watt) AND T500 (P/N# 336P009030) | |
| MITSUBISHI | VS5071 | N/A | PICTURE ROLLS ON DARK SCENES | CHECK/REPLACE IC2002 (P/N# 267P076020) | |
| MITSUBISHI | VS5071 | N/A | RED VERTICAL LINE ON THE RIGHT SIDE ON PAY CHANNELS | ADD 560pF CAPACITOR ACROSS R2L1 | |
| MITSUBISHI | VS5071 | N/A | NO PICTURE | CHECK/REPLACE R509 (100?1/2w) | |
| MITSUBISHI | VS5072 | N/A | RED VERTICAL LINE ON THE RIGHT SIDE ON PAY CHANNELS | ADD 560pF CAPACITOR ACROSS R2L1 | |
| MITSUBISHI | VS5073 | N/A | RED VERTICAL LINE ON THE RIGHT SIDE ON PAY CHANNELS | ADD 560pF CAPACITOR ACROSS R2L1 | |
| MITSUBISHI | VS5074 | N/A | RED VERTICAL LINE ON THE RIGHT SIDE ON PAY CHANNELS | ADD 560pF CAPACITOR ACROSS R2L1 | |
| MITSUBISHI | VS5075 | N/A | INCORRECT OPERATION OF ACTIVE A/V & STARSIGHT FUNCTIONS | CHECK/REPLACE Q718 (MUST BE P/N# 260P806010) MUST BE DTA124EK OR UN2112 | |
| MITSUBISHI | VS5075 | N/A | BRIGHT PICTURE THEN SHUTS DOWN | CHECK/REPLACE R9A45 (180? AND C9A57 (1uF @ 350v) | |
| MITSUBISHI | VS5075 | N/A | PINCUSHION PROBLEMS | CHECK/REPLACE IC4A01 (P/N# 270P276010) | |
| MITSUBISHI | VS5075 | N/A | NO PINCUSHION CORRECTION OR CONVERGENCE CONTROL | CHECK/REPLACE IC4A01 (P/N# 270276010) | |
| MITSUBISHI | VS5076 | N/A | INCORRECT OPERATION OF ACTIVE A/V & STARSIGHT FUNCTIONS | CHECK/REPLACE Q718 (MUST BE P/N# 260P806010) MUST BE DTA124EK OR UN2112 | |
| MITSUBISHI | VS50VA1 | N/A | CLOCK LOSES OR GAINS TIME | INSTALL CLOCK KIT COMPONENTS (P/N# VZ-CLOCK-KIT) | |
| MITSUBISHI | VS50VA1 | N/A | NO ON-SCREEN DISPLAY | CHECK/REPLACE C2S4 (330pF @ 50v) | |
| MITSUBISHI | VS50VA1 | N/A | VERTICAL JITTER IN TV TUNER MODE | CHECK/REPLACE C7613 | |
| MITSUBISHI | VS50VA1 | N/A | ONE PRIMARY COLOR TOO BRIGHT WITH RETRACE LINES - SCREEN CONTROL WILL NOT GO LOW ENOUGH | CHECK/REPLACE R6H3 (RED), R6H4 (GREEN) OR R6H5 (BLUE) | |
| MITSUBISHI | VS50VA1 | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS50VA2 | N/A | NO POWER | CHECK/REPLACE T900 FOR OPEN (P/N# 350P58101) | |
| MITSUBISHI | VS50VA2 | N/A | ONE PRIMARY COLOR TOO BRIGHT WITH RETRACE LINES - SCREEN CONTROL WILL NOT GO LOW ENOUGH | CHECK/REPLACE R6H3 (RED), R6H4 (GREEN) OR R6H5 (BLUE) | |
| MITSUBISHI | VS50VA2 | N/A | NO OSD FUNCTION CONTROL | CHECK/REPLACE IC703 (P/N# 272P758010) | |
| MITSUBISHI | VS50VA2 | N/A | CLOCK LOSES OR GAINS TIME | INSTALL CLOCK KIT COMPONENTS (P/N# VZ-CLOCK-KIT) | |
| MITSUBISHI | VS50VA2 | N/A | NO OSD FUNCTION CONTROL - OSD ROLLS - NO PIP - RANDOM PICTURE DISTORTION | CHECK/REPLACE IC701 (P/N# 274P200010) | |
| MITSUBISHI | VS50VA2 | N/A | RED RETRACE LINES | CHECK/REPLACE R6H0 (1.2m 1/2w) FOR OPEN | |
| MITSUBISHI | VS50VA2 | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS50VA2CA | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS50VX1 | N/A | PIP IS DISPLAYED IN ALL FOUR CORNERS | UNPLUG UNIT AND RECONNECT TO RESET CONTROL CIRCUITS | |
| MITSUBISHI | VS50VX1 | N/A | INTERMITTENT OR NO COLOR | CHECK/REPLACE C214 (0.22uF @ 50v) | |
| MITSUBISHI | VS50VX1 | N/A | NO VIDEO | CHECK/REPLACE C256 (100uF @ 25v) | |
| MITSUBISHI | VS50VX1 | V11 | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS510U | N/A | NO VIDEO BUT TEST PATTERN DOES WORK | CHECK/REPLACE Q250 FOR E-B LEAKAGE | |
| MITSUBISHI | VS526R | N/A | 130V SUPPLY IS TOO HIGH | CHECK/REPLACE C904 (22uF @ 160v) | |
| MITSUBISHI | VS581 | V7 | RED OR BLUE CONVERGENCE OUT AND UNABLE TO ADJUST | CHECK/REPLACE IC8A0 AND/OR IC8A1, ALSO C8A5 & C8A6 | |
| MITSUBISHI | VS582 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS582 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS582 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS585 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS585 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS585 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS586 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS586 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS586 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS6002 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS6002R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS6002R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS6002R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS6002R | V11 | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS6004 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS6004R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS6004R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS6004R | V11 | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS6015 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS6015R | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE L911 (P/N# 411P001040) | |
| MITSUBISHI | VS6015R | N/A | RED WILL NOT CONVERGE IN THE LOWER LEFT CORNER | CHECK/REPLACE R420 (330 1/4w) | |
| MITSUBISHI | VS6015R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS6017R | N/A | VERY WEAK VIDEO | CHECK/REPLACE IC8A0 AND IC8A1 (P/N# 267P077020) | |
| MITSUBISHI | VS6017R | N/A | CONVERGENCE SHIFTS - VOLUME VARIES - ALL SIDES OF PICTURE PULLED IN | CHECK/REPLACE C933 (470uF @ 180v) (P/N# 185D063020) | |
| MITSUBISHI | VS6017R | N/A | INTERMITTENT POWER ON | CHECK/REPLACE C914 (22uF @ 50v) | |
| MITSUBISHI | VS6021 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS6021 | N/A | INTERMITTENT LUMINANCE | CHECK/REPLACE IC2B01 (P/N# 272P181010) | |
| MITSUBISHI | VS6021R | N/A | DEAD SET - NO HIGH VOLTAGE | CHECK/RESOLDER CONNECTIONS ON T501 AND R505 - MITSUBISHI RECOMMENDS INSTALLATION OF CM-KIT - THIS IS P/N TO ORDER BY | |
| MITSUBISHI | VS6021R | N/A | NO VIDEO BUT HIGH VOLTAGE IS OK | CHECK/REPLACE R511 (100 ohm) FOR OPEN | |
| MITSUBISHI | VS6021R | N/A | RELAY CLICKS ON THEN BACK OFF - BURNING SMELL - VERTICAL OUTPUT IC BURNED AND CIRCUIT BOARD IS CHARRED | CHECK/REPLACE IC401 (P/N#272P239040),D4000 (P/N#264P487030) C914 (47uF @ 50v) AND C920 (10uF @ 160v) | |
| MITSUBISHI | VS6021R | N/A | NO VIDEO BUT DOES HAVE COLOR INFORMATION | CHECK/REPLACE Q229 FOR SHORT (P/N# 260P559030) | |
| MITSUBISHI | VS6021R | V11 | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS6026R | N/A | NO SOUND OR PICTURE | CHECK/REPLACE C7608 (0.01uf @ 16v) | |
| MITSUBISHI | VS6041 | N/A | HORIZONTAL FOLDOVER | CHECK/REPLACE T500 (P/N# 336P009030) | |
| MITSUBISHI | VS6051 | N/A | POWER SUPPLY PULSATES ON/OFF | CHECK/REPLACE IC9A1 (P/N# 267P062010) | |
| MITSUBISHI | VS6051 | VZ2 | WILL NOT POWER ON | CHECK/REPLACE D9A00 (P/N# 264P102020) AND IC9A0 (P/N# 267P112050) | |
| MITSUBISHI | VS6051 | VZ2 | INTERMITTENTLY WON'T POWER UP ON FIRST ATTEMPT | REMOVE L9A30(BEAD ON LEG OF R9A21)-CHANGE R9A22 TO 1.2k, R9A12 TO 15k,C9A15 TO 330uF,ADD 22uF/100v PARALLEL W/C9A17 | |
| MITSUBISHI | VS6061 | N/A | HUM IN AUDIO | REMOVE JUMPER #239, ADD A WIRE FROM JUMPER #40 TO THE HEAT SINK MOUNTING TABS FOR IC300 | |
| MITSUBISHI | VS6071 | N/A | RED VERTICAL LINE ON THE RIGHT SIDE ON PAY CHANNELS | ADD 560pF CAPACITOR ACROSS R2L1 | |
| MITSUBISHI | VS6085 | N/A | INCORRECT OPERATION OF ACTIVE A/V & STARSIGHT FUNCTIONS | CHECK/REPLACE Q718 (MUST BE P/N# 260P806010) MUST BE DTA124EK OR UN2112 | |
| MITSUBISHI | VS60VA1 | N/A | ONE PRIMARY COLOR TOO BRIGHT WITH RETRACE LINES - SCREEN CONTROL WILL NOT GO LOW ENOUGH | CHECK/REPLACE R6H3 (RED), R6H4 (GREEN) OR R6H5 (BLUE) | |
| MITSUBISHI | VS60VA2 | N/A | ONE PRIMARY COLOR TOO BRIGHT WITH RETRACE LINES - SCREEN CONTROL WILL NOT GO LOW ENOUGH | CHECK/REPLACE R6H3 (RED), R6H4 (GREEN) OR R6H5 (BLUE) | |
| MITSUBISHI | VS60VA2 | N/A | CLOCK LOSES OR GAINS TIME | INSTALL CLOCK KIT COMPONENTS (P/N# VZ-CLOCK-KIT) | |
| MITSUBISHI | VS60VA2 | N/A | PINCUSHION CONTROL HAS LIMITED RANGE | CHECK/REPLACE C5A1 AND C5A2 (2.2uF @ 50v) | |
| MITSUBISHI | VS60VA2 | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS60VA2CA | VZ1 | WASHED OUT VIDEO - DARK PICTURE WITH BENDING AND TEARING - LOOKS LIKE AGC PROBLEM BUT PROBLEM IS ALOS ON VIDEO INPUT | CHECK/REPLACE C7001 (4.7uF @ 35v), C7011 & C7027 (2.2uF @ 35v) | |
| MITSUBISHI | VS60VF1 | N/A | NO HIGH VOLTAGE | CHECK/REPLACE Q551 AND D550 (P/N# 264P533010) | |
| MITSUBISHI | VS685 | N/A | SOME FRONT PANEL BUTTONS ARE INOPERATIVE | CHECK IC7700 | |
| MITSUBISHI | VS685 | N/A | PICTURE EXTREMELY STRETCHED VERTICALLY | CHECK C2B0 (SIGNAL BOARD) | |
| MITSUBISHI | VS685 | V9 | LOSS OF CONVERGENCE-PIX PULLED IN 3' ON RIGHT | CHECK D952-ALSO CONNECTIONS ON T902 | |
| MITSUBISHI | VS7001 | N/A | SET SHUTS DOWN | CHECK/REPLACE C812,C814 AND C880 | |
| MITSUBISHI | VS7001 | N/A | SET SHUTS DOWN | ||
| MITSUBISHI | VS7001 | N/A | RELAY CLICKS, HIGH VOLTAGE COMES UP AND THEN SHUTS DOWN | CHECK/REPLACE R540 (1 @ 1/2w) | |
| MITSUBISHI | VS7001R | N/A | LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE IC401,C920 AND D4000 OR REPLACE AS A KIT (P/N# IC-401) | |
| MITSUBISHI | VS7001R | N/A | CONVERGENCE ADJUSTMENT HAVE NO EFFECT | CHECK/REPLACE R718,R719,R720 AND R7F0 ON SIGNAL PCB | |
| MITSUBISHI | VS7001R | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE C812,C814 AND C880 ON CONVERGENCE BOARD | |
| MITSUBISHI | VS7001R | N/A | VERTICAL PINCUSHION PROBLEMS - BOWED AT TOP AND THE BOTTOM | CHECK/REPLACE R4A5 FOR OPEN OR POOR CONNECTIONS | |
| MITSUBISHI | VS7004 | N/A | HORIZONTAL OUTPUT SHORTS AT TURN ON | CHECK/REPLACE IC900 (SHORT ON PINS 1 & 3),D920 AND Q900 SHORTED | |
| MITSUBISHI | VS7004R | V11 | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
| MITSUBISHI | VS7071 | N/A | RED VERTICAL LINE ON THE RIGHT SIDE ON PAY CHANNELS | ADD 560pF CAPACITOR ACROSS R2L1 | |
| MITSUBISHI | VS7085 | N/A | INCORRECT OPERATION OF ACTIVE A/V & STARSIGHT FUNCTIONS | CHECK/REPLACE Q718 (MUST BE P/N# 260P806010) MUST BE DTA124EK OR UN2112 | |
| NEC | PJ4010EN | N/A | NO VERTICAL SWEEP | CHECK/REPLACE OR RESOLDER CONNECTIONS ON TR401,TR402,TR403 | |
| NEC | PJ4010EN | N/A | DEAD SET AND NO HORZ. DRIVE | CHECK/REPLACE RC591 (HIGH VOLTAGE RECTIFIER ASSEMBLY) | |
| NEC | PJ4010EN | WA31 | RED-BLUE CONVERGENCE NOT MOVING FAR ENOUGH | CHECK IC802,IC803,R885B,R885R,R887B,R887R | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | DEAD SET AFTER DEFLECTION BOARD REPLACED | JUMPER B30 NEEDS TO BE CUT IN SOME SETS | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8040B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8040B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8137 | PTV200 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8137 | PTV200 | CONVERGENCE PROBLEMS - NO RED HORZ. MOVEMENT | CHECK/REPLACE IC12 ON CONVERGENCE BOARD | |
| PHILCO | P8137 | PTV200 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8137 | PTV200 | DEAD SET - ONLY CLICKS ON THEN BACK OFF | CHECK/REPLACE D16 FOR SHORT AND LOOK FOR A SHORT ON THE CONVERGENCE BOARD. | |
| PHILCO | P8137 | PTV200 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8137 | PTV200 | CONVERGENCE PROBLEMS - GREEN HORZ. SHIFTED | CHECK/REPLACE IC14 ON CONVERGENCE BOARD | |
| PHILCO | P8137 | PTV200 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8137W | PTV100 | RELAY CLICKS ON THEN BACK OFF IMMEDIATELY | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P8137W | PTV100 | BLOWS AC LINE FUSE | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P8340 | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340 | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340 | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340 | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | DEAD SET AFTER DEFLECTION BOARD REPLACED | JUMPER B30 NEEDS TO BE CUT IN SOME SETS | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8340B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8340B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8341C | PTV310 | NO SOUND-NO MENUS-DOES HAVE HIGH VOLTAGE AND A BLANK RASTER IF SCREEN CONTROLS ARE INCREASED - SANDCASTLE DISTORTED | CHECK/REPLACE R1,R2,R3,R4,R5 AND R6 ON CONVERGENCE POWER PANEL (LOCATED NEAR AC LINE CORD) | |
| PHILCO | P8341D | PTV340 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILCO | P8341D | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| PHILCO | P8341D | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE MUTING TRANSISTORS Q203 AND Q204 | |
| PHILCO | P8341D | PTV340 | PLAYS FOR ABOUT 15 MINUTES THEN SHUTS OFF - ALSO SHUTS OFF WHEN CHANNELS ARE CHANGED. | CHECK/REPLACE Z460 | |
| PHILCO | P8341D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8341D | PTV340 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILCO | P8341D | PTV340 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILCO | P8341D | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| PHILCO | P8341D | PTV340 | NO PICTURE OR HIGH VOLTAGE BUT DOES HAVE SOUND | CHECK/REPLACE IC550 AND R552 | |
| PHILCO | P8341D | PTV340 | DEAD SET --CHECK Q501 TO GROUND FOR SHORTS | REPLACE Q501--CHECK CONNECTIONS ON D414 | |
| PHILCO | P8341D | PTV340 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILCO | P8341D | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| PHILCO | P8341D | PTV340 | DEAD SET --CHECK Q501 TO GROUND FOR SHORTS | REPLACE Q501--CHECK CONNECTIONS ON D414 | |
| PHILCO | P8341D | PTV340 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILCO | P8341D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8341D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8341D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8341D | PTV340 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILCO | P8341D | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| PHILCO | P8341D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8341D | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| PHILCO | P8341D | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| PHILCO | P8341D | PTV340 | NUISANCE SHUTDOWN | REPLACE DEFLECTION MODULE AND ALL 3 CRT BOARDS | |
| PHILCO | P8341D | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| PHILCO | P8341D | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE Q203 AND Q204 (MUTING FET'S) | |
| PHILCO | P8341D | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| PHILCO | P8341D | PTV340 | SET SHUTS DOWN 15 SECONDS AFTER TURN ON | CHECK/REPLACE Z503 (8.2V ZENER) | |
| PHILCO | P8341D | PTV340 | ON SCREEN CLOCK LOSES 15 TO 20 MINUTES PER DAY | CHECK IC303 PIN 2 FOR 32.768KHZ AND ADJUST C340 FOR PROPER FREQUENCY. | |
| PHILCO | P8341D | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| PHILCO | P8341D | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| PHILCO | P8341D | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| PHILCO | P8341D | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| PHILCO | P8341D | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| PHILCO | P8341D | PTV340 | DEAD SET OR NO B+ REGULATION | CHECK/RESOLDER CONNECTIONS BETWEEN TP8 AND C30 (PWR.SUP.) | |
| PHILCO | P8341D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8341D | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| PHILCO | P8341D | PTV340 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILCO | P8341D | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| PHILCO | P8341D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8341D | PTV340 | DEAD SET - NO SOUND OR PICTURE INTERMITTENTLY | CHECK/REPLACE IC403 (5 VOLT REGULATOR) | |
| PHILCO | P8341D | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| PHILCO | P8341D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8341D | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| PHILCO | P8341D | PTV340 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| PHILCO | P8341D | PTV340 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILCO | P8341D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8341D | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| PHILCO | P8341D | PTV340 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| PHILCO | P8341D | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| PHILCO | P8341D | PTV340 | LOSS OF ONE COLOR TO LOSS OF VIDEO | INST. .01uF AT JUMPER B803 | |
| PHILCO | P8341D | PTV340 | DEAD SET OR NO B+ REGULATION | CHECK/RESOLDER CONNECTIONS BETWEEN TP8 AND C30 (PWR.SUP.) | |
| PHILCO | P8341D | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| PHILCO | P8341D | PTV340 | BLACK STRIPE DOWN LEFT SIDE OF PICTURE | CHECK/REPLACE IC200 | |
| PHILCO | P8341D | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| PHILCO | P8346 | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346 | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346 | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346 | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | DEAD SET AFTER DEFLECTION BOARD REPLACED | JUMPER B30 NEEDS TO BE CUT IN SOME SETS | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | SOUND OK-HIGH VOLTAGE OK BUT NO PICTURE | HARD WIRE PIN 4 OF J205 TO PIN 14 OF T2 AND PIN 5 OF J205 TO PIN 8 OF T2 (FILAMENT VOLTAGE) | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346B | PTV300 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P8346C | PTV310 | NO SOUND-NO MENUS-DOES HAVE HIGH VOLTAGE AND A BLANK RASTER IF SCREEN CONTROLS ARE INCREASED - SANDCASTLE DISTORTED | CHECK/REPLACE R1,R2,R3,R4,R5 AND R6 ON CONVERGENCE POWER PANEL (LOCATED NEAR AC LINE CORD) | |
| PHILCO | P8346D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8346D | PTV340 | SET SHUTS DOWN 15 SECONDS AFTER TURN ON | CHECK/REPLACE Z503 (8.2V ZENER) | |
| PHILCO | P8346D | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| PHILCO | P8346D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8346D | PTV340 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILCO | P8346D | PTV340 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILCO | P8346D | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| PHILCO | P8346D | PTV340 | DEAD SET --CHECK Q501 TO GROUND FOR SHORTS | REPLACE Q501--CHECK CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | DEAD SET --CHECK Q501 TO GROUND FOR SHORTS | REPLACE Q501--CHECK CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8346D | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| PHILCO | P8346D | PTV340 | ON SCREEN CLOCK LOSES 15 TO 20 MINUTES PER DAY | CHECK IC303 PIN 2 FOR 32.768KHZ AND ADJUST C340 FOR PROPER FREQUENCY. | |
| PHILCO | P8346D | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| PHILCO | P8346D | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| PHILCO | P8346D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| PHILCO | P8346D | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| PHILCO | P8346D | PTV340 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILCO | P8346D | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| PHILCO | P8346D | PTV340 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| PHILCO | P8346D | PTV340 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILCO | P8346D | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| PHILCO | P8346D | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| PHILCO | P8346D | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| PHILCO | P8346D | PTV340 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILCO | P8346D | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| PHILCO | P8346D | PTV340 | PLAYS FOR ABOUT 15 MINUTES THEN SHUTS OFF - ALSO SHUTS OFF WHEN CHANNELS ARE CHANGED. | CHECK/REPLACE Z460 | |
| PHILCO | P8346D | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| PHILCO | P8346D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| PHILCO | P8346D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE Q203 AND Q204 (MUTING FET'S) | |
| PHILCO | P8346D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| PHILCO | P8346D | PTV340 | BLACK STRIPE DOWN LEFT SIDE OF PICTURE | CHECK/REPLACE IC200 | |
| PHILCO | P8346D | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8346D | PTV340 | NUISANCE SHUTDOWN | REPLACE DEFLECTION MODULE AND ALL 3 CRT BOARDS | |
| PHILCO | P8346D | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| PHILCO | P8346D | PTV340 | LOSS OF ONE COLOR TO LOSS OF VIDEO | INST. .01uF AT JUMPER B803 | |
| PHILCO | P8346D | PTV340 | DEAD SET OR NO B+ REGULATION | CHECK/RESOLDER CONNECTIONS BETWEEN TP8 AND C30 (PWR.SUP.) | |
| PHILCO | P8346D | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE MUTING TRANSISTORS Q203 AND Q204 | |
| PHILCO | P8346D | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILCO | P8346D | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| PHILCO | P8346D | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| PHILCO | P8346D | PTV340 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILCO | P8346D | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| PHILCO | P8346D | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| PHILCO | P8346D | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| PHILCO | P8346D | PTV340 | DEAD SET - NO SOUND OR PICTURE INTERMITTENTLY | CHECK/REPLACE IC403 (5 VOLT REGULATOR) | |
| PHILCO | P8346D | PTV340 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILCO | P8346D | PTV340 | DEAD SET OR NO B+ REGULATION | CHECK/RESOLDER CONNECTIONS BETWEEN TP8 AND C30 (PWR.SUP.) | |
| PHILCO | P8346D | PTV340 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| PHILCO | P8346D | PTV340 | NO PICTURE OR HIGH VOLTAGE BUT DOES HAVE SOUND | CHECK/REPLACE IC550 AND R552 | |
| PHILCO | P8346D | PTV340 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILCO | P8348C | PTV325 | NO SOUND-NO MENUS-DOES HAVE HIGH VOLTAGE AND A BLANK RASTER IF SCREEN CONTROLS ARE INCREASED - SANDCASTLE DISTORTED | CHECK/REPLACE R1,R2,R3,R4,R5 AND R6 ON CONVERGENCE POWER PANEL (LOCATED NEAR AC LINE CORD) | |
| PHILCO | P8348D | PTV350 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILCO | P8348D | PTV350 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILCO | P8348D | PTV350 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILCO | P8348D | PTV350 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8348D | PTV350 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILCO | P8348D | PTV350 | LOW OR NO AUDIO FROM ONE OR BOTH CHANNELS | CHECK Q203 AND Q204 (FET) STEREO AMP. BOARD | |
| PHILCO | P8348D | PTV350 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILCO | P8348D | PTV350 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILCO | P8348D | PTV350 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILCO | P8348D | PTV350 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| PHILCO | P8348D | PTV350 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| PHILCO | P8348D | PTV350 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| PHILCO | P8348D | PTV350 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILCO | P8348D | PTV350 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILCO | P8348D | PTV350 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILCO | P9037 | PTV100 | 4' LINE AFTER REPLACING THE CONVERGENCE PANEL | VERIFY PRESENCE OF C88 AND THAT VALUE IS .0047uF | |
| PHILCO | P9037 | PTV100 | RELAY CLICKS ON THEN BACK OFF IMMEDIATELY | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV100 | RELAY CLICKS ON THEN BACK OFF IMMEDIATELY | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV100 | DEAD SET - ONLY CLICKS ON THEN BACK OFF | CHECK/REPLACE D16 FOR SHORT AND LOOK FOR A SHORT ON THE CONVERGENCE BOARD. | |
| PHILCO | P9037 | PTV100 | BLOWS AC LINE FUSE | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV100 | BLOWS AC LINE FUSE | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV100 | BLOWS AC LINE FUSE | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV100 | BOWING OR CIRCULAR PATTERN ON VACANT CHANNELS | REPLACED 7050490004 | |
| PHILCO | P9037 | PTV100 | RELAY CLICKS ON THEN BACK OFF IMMEDIATELY | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV100 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILCO | P9037 | PTV100 | BLOWS AC LINE FUSE | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV100 | DEAD SET AFTER DEFLECTION BOARD REPLACED | JUMPER B30 NEEDS TO BE CUT IN SOME SETS | |
| PHILCO | P9037 | PTV100 | JAPANESE CHARACTERS DISPLAYED AFTER THE REPLACEMENT OF IC1200 | MAKE SURE THE IC HAS MN1277B AND NOT AN 'A' SUFFIX | |
| PHILCO | P9037 | PTV100 | RELAY CLICKS ON THEN BACK OFF IMMEDIATELY | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILCO | P9037 | PTV200 | CONVERGENCE PROBLEMS - NO BLUE HORZ. MOVEMENT | CHECK/REPLACE IC10 ON CONVERGENCE BOARD | |
| PHILCO | P9037 | PTV200 | CONVERGENCE PROBLEMS - GREEN VERT. SHIFTED | CHECK/REPLACE IC15 ON CONVERGENCE BOARD | |
| PHILCO | P9037 | PTV200 | CONVERGENCE PROBLEMS - NO RED HORZ. MOVEMENT | CHECK/REPLACE IC12 ON CONVERGENCE BOARD | |
| PHILCO | P9037 | PTV200 | DEAD SET - ONLY CLICKS ON THEN BACK OFF | CHECK/REPLACE D16 FOR SHORT AND LOOK FOR A SHORT ON THE CONVERGENCE BOARD. | |
| PHILCO | P9037 | PTV200 | CONVERGENCE PROBLEMS - NO RED VERT. MOVEMENT | CHECK/REPLACE IC13 ON CONVERGENCE BOARD | |
| PHILCO | P9037 | PTV200 | CONVERGENCE PROBLEMS - GREEN HORZ. SHIFTED | CHECK/REPLACE IC14 ON CONVERGENCE BOARD | |
| PHILCO | P9037 | PTV200 | CONVERGENCE PROBLEMS - NO BLUE VERT. MOVEMENT | CHECK/REPLACE IC11 ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV100 | DEAD SET AFTER DEFLECTION BOARD REPLACED | JUMPER B30 NEEDS TO BE CUT IN SOME SETS | |
| PHILIPS | N/A | PTV100 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV100 | 4' LINE AFTER REPLACING THE CONVERGENCE PANEL | VERIFY PRESENCE OF C88 AND THAT VALUE IS .0047uF | |
| PHILIPS | N/A | PTV100 | BOWING OR CIRCULAR PATTERN ON VACANT CHANNELS | REPLACED 7050490004 | |
| PHILIPS | N/A | PTV100 | RELAY CLICKS ON THEN BACK OFF IMMEDIATELY | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILIPS | N/A | PTV100 | DEAD SET - ONLY CLICKS ON THEN BACK OFF | CHECK/REPLACE D16 FOR SHORT AND LOOK FOR A SHORT ON THE CONVERGENCE BOARD. | |
| PHILIPS | N/A | PTV100 | BLOWS AC LINE FUSE | CHECK/REPLACE Q10,Q14 AND Q11 ON POWER BOARD AND Q10 ON DEFLECTION BOARD. | |
| PHILIPS | N/A | PTV100 | JAPANESE CHARACTERS DISPLAYED AFTER THE REPLACEMENT OF IC1200 | MAKE SURE THE IC HAS MN1277B AND NOT AN 'A' SUFFIX | |
| PHILIPS | N/A | PTV200 | DEAD SET - ONLY CLICKS ON THEN BACK OFF | CHECK/REPLACE D16 FOR SHORT AND LOOK FOR A SHORT ON THE CONVERGENCE BOARD. | |
| PHILIPS | N/A | PTV200 | JAPANESE CHARACTERS DISPLAYED AFTER THE REPLACEMENT OF IC1200 | MAKE SURE THE IC HAS MN1277B AND NOT AN 'A' SUFFIX | |
| PHILIPS | N/A | PTV200 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV200 | 4' LINE AFTER REPLACING THE CONVERGENCE PANEL | VERIFY PRESENCE OF C88 AND THAT VALUE IS .0047uF | |
| PHILIPS | N/A | PTV300 | DEAD SET AFTER DEFLECTION BOARD REPLACED | JUMPER B30 NEEDS TO BE CUT IN SOME SETS | |
| PHILIPS | N/A | PTV300 | NO SOUND OR PIX - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE D20 AND R81 IN THE 45V SUPPLY. | |
| PHILIPS | N/A | PTV300 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV300 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV310 | NO VIDEO - REGULATED B+ IS TOO HIGH | CHECK Z2 FOR OPEN (APW010 MODULE) | |
| PHILIPS | N/A | PTV310 | RASTER BUT NO PICTURE - SOUND OK | CHECK/REPLACE Q204 ON THE SMALL SIGNAL BOARD | |
| PHILIPS | N/A | PTV310 | NO VIDEO | REPLACED OPEN DIODE Z2 ON POWER MODULE | |
| PHILIPS | N/A | PTV310 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV310 | NO SOUND-NO MENUS-DOES HAVE HIGH VOLTAGE AND A BLANK RASTER IF SCREEN CONTROLS ARE INCREASED - SANDCASTLE DISTORTED | CHECK/REPLACE R1,R2,R3,R4,R5 AND R6 ON CONVERGENCE POWER PANEL (LOCATED NEAR AC LINE CORD) | |
| PHILIPS | N/A | PTV310 | DEAD SET-RELAY CLICKS TWICE WHEN POWER BUTTON PRESSED | CHECK/REPLACE R35 ON POWER SUPPLY BOARD | |
| PHILIPS | N/A | PTV310 | DEAD SET - RELAY CYCLES AFTER ABOUT 2 SECONDS | CHECK/REPLACE R35 ON POWER SUPPLY BOARD | |
| PHILIPS | N/A | PTV310 | RANDOM SWITCHING FROM AUX TO ANT MODE | CHECK TO SEE IF R94 IS 560 OHM ON JACK PANEL | |
| PHILIPS | N/A | PTV310 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV325 | DEAD SET - RELAY CYCLES AFTER ABOUT 2 SECONDS | CHECK/REPLACE R35 ON POWER SUPPLY BOARD | |
| PHILIPS | N/A | PTV325 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV325 | RANDOM SWITCHING FROM AUX TO ANT MODE | CHECK TO SEE IF R94 IS 560 OHM ON JACK PANEL | |
| PHILIPS | N/A | PTV325 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV325 | NO SOUND-NO MENUS-DOES HAVE HIGH VOLTAGE AND A BLANK RASTER IF SCREEN CONTROLS ARE INCREASED - SANDCASTLE DISTORTED | CHECK/REPLACE R1,R2,R3,R4,R5 AND R6 ON CONVERGENCE POWER PANEL (LOCATED NEAR AC LINE CORD) | |
| PHILIPS | N/A | PTV325 | HORZ FLAGGING AT TOP OF PIX WHILE PLAYING A VCR | REMOVE JUMPER FROM J203 ON THE HORZ. OSC. BOARD | |
| PHILIPS | N/A | PTV330 | DEAD SET AFTER DEFLECTION BOARD REPLACED | JUMPER B30 NEEDS TO BE CUT IN SOME SETS | |
| PHILIPS | N/A | PTV330 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV340 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILIPS | N/A | PTV340 | SNOWY OR INTERMITTENT SNOWY PICTURE | CHECK/RESOLDER BROKEN FOIL CONNECTIONS NEAR R215 | |
| PHILIPS | N/A | PTV340 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILIPS | N/A | PTV340 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILIPS | N/A | PTV340 | SET SHUTS DOWN 15 SECONDS AFTER TURN ON | CHECK/REPLACE Z503 (8.2V ZENER) | |
| PHILIPS | N/A | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE Q203 AND Q204 (MUTING FET'S) | |
| PHILIPS | N/A | PTV340 | NOISE IN PIX,LOSS OF ONE OR MORE COLORS OR VIDEO | CHECK FOR .01uF AT JUMPER B803 (CRT BOARDS) | |
| PHILIPS | N/A | PTV340 | DEAD SET OR NO B+ REGULATION | CHECK/RESOLDER CONNECTIONS BETWEEN TP8 AND C30 (PWR.SUP.) | |
| PHILIPS | N/A | PTV340 | VERTICAL JITTER ON THE TOP OF SCREEN | CHECK/REPLACE C553 | |
| PHILIPS | N/A | PTV340 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| PHILIPS | N/A | PTV340 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV340 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV340 | INTERMITTENT HIGH VOLTAGE SHUTDOWN | CHECK/CHANGE R457 TO A 120k (ONLY IF SET HAS THE GREY HVT) | |
| PHILIPS | N/A | PTV340 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV340 | PICTURE GOES TO BRIGHT GREEN SCREEN WITH RETRACE AND THEN SHUTSDOWN. | CHECK/REPLACE IC680 | |
| PHILIPS | N/A | PTV340 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV340 | NO PICTURE BUT SOUND IS OK | CHECK/RESOLDER CONNECTIONS ON T4,R64 AND R65 ON POWER SUPPLY PANEL. | |
| PHILIPS | N/A | PTV340 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| PHILIPS | N/A | PTV340 | PLAYS FOR ABOUT 15 MINUTES THEN SHUTS OFF - ALSO SHUTS OFF WHEN CHANNELS ARE CHANGED. | CHECK/REPLACE Z460 | |
| PHILIPS | N/A | PTV340 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILIPS | N/A | PTV340 | NUISANCE SHUTDOWN | REPLACE DEFLECTION MODULE AND ALL 3 CRT BOARDS | |
| PHILIPS | N/A | PTV340 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV340 | ON SCREEN CLOCK LOSES 15 TO 20 MINUTES PER DAY | CHECK IC303 PIN 2 FOR 32.768KHZ AND ADJUST C340 FOR PROPER FREQUENCY. | |
| PHILIPS | N/A | PTV340 | DEAD SET AND POWER LED DOESN'T LIGHT | CHECK/REPLACE IC400 | |
| PHILIPS | N/A | PTV340 | LITTLE OR NO AUDIO | CHECK/REPLACE MUTING TRANSISTORS Q203 AND Q204 | |
| PHILIPS | N/A | PTV340 | LOSS OF ONE COLOR TO LOSS OF VIDEO | INST. .01uF AT JUMPER B803 | |
| PHILIPS | N/A | PTV340 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILIPS | N/A | PTV340 | POOR CONVERGENCE | CHECK/REPLACE R17,R18,R37,R38 ON CONVERGENCE POWER BD. AND IC3 AND IC5 ON WAVEFORM BD. | |
| PHILIPS | N/A | PTV340 | NO PICTURE OR HIGH VOLTAGE BUT DOES HAVE SOUND | CHECK/REPLACE IC550 AND R552 | |
| PHILIPS | N/A | PTV340 | DEAD SET - NO SOUND OR PICTURE INTERMITTENTLY | CHECK/REPLACE IC403 (5 VOLT REGULATOR) | |
| PHILIPS | N/A | PTV350 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| PHILIPS | N/A | PTV350 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILIPS | N/A | PTV350 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILIPS | N/A | PTV350 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV350 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILIPS | N/A | PTV350 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| PHILIPS | N/A | PTV350 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILIPS | N/A | PTV350 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| PHILIPS | N/A | PTV350 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILIPS | N/A | PTV350 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILIPS | N/A | PTV350 | LOW OR NO AUDIO FROM ONE OR BOTH CHANNELS | CHECK Q203 AND Q204 (FET) STEREO AMP. BOARD | |
| PHILIPS | N/A | PTV350 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV350 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV350 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV355 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILIPS | N/A | PTV355 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV355 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILIPS | N/A | PTV355 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILIPS | N/A | PTV355 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILIPS | N/A | PTV355 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV355 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV355 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILIPS | N/A | PTV355 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV355 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV355 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| PHILIPS | N/A | PTV360 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILIPS | N/A | PTV360 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILIPS | N/A | PTV360 | DEAD SET | CHECK Q501 AND CONNECTIONS ON D414 | |
| PHILIPS | N/A | PTV360 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV360 | CONVERGENCE OFF AND WILL NOT ADJUST | CHECK/REPLACE IC1 ON THE WAVEFORM PANEL | |
| PHILIPS | N/A | PTV360 | RED CRT DOES NOT COME ON (COULD BE ANY OF THE PRIMARY COLORS) | CHECK/REPLACE Q801 | |
| PHILIPS | N/A | PTV360 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILIPS | N/A | PTV360 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILIPS | N/A | PTV360 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV360 | SET SHUTS DOWN | CHECK/REPLACE R457 | |
| PHILIPS | N/A | PTV360 | NO GRAPHICS AND PIX SHIFTED TO THE RIGHT WITH FOLD AND SOMETIMES CONVERGENCE IS OFF | CHECK/REPLACE COLOR PIP MODULE | |
| PHILIPS | N/A | PTV360 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV365 | SEVERE RINGING ON LIGHT TO DARK TRANSITIONS - ONLY APPLIES TO MODELS WITH SCAN VELOCITY MODULATION CIRCUITRY. | CHANGE R582 TO A 220 ohm AND RP502 TO A 68 ohm - DO NOT CONFUSE RP502 WITH R502. | |
| PHILIPS | N/A | PTV365 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV365 | WHENEVER SERVICING THE R1 CHASSIS | CHECK FOR PRESENCE OF C443 (BE SURE ITS 47pF) | |
| PHILIPS | N/A | PTV365 | POWER SUPPLY OR DEFLECTION PROBLEMS | CHECK/REPLACE D414,IC401,IC550,Q410,Q501,R421,R424,R425 AND R552 | |
| PHILIPS | N/A | PTV365 | DIAGONAL LINES IN PIX OR SPOTS | CHECK VALUE OF C443--IT SHOULD BE 47pF | |
| PHILIPS | N/A | PTV365 | VERTICAL LINE ON ONE OR MORE TUBES | CHECK/REPLACE LEAKY BLANKING TRANSISTOR OR REPLACE ENTIRE MODULE (A10359 OR A10363) BEFORE REPLACING CRT | |
| PHILIPS | N/A | PTV365 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILIPS | N/A | PTV365 | POOR FOCUS AT BOTTOM OF PIX - TOP IS NORMAL (THIS WILL NORMALLY ONLY BE ONE OF THE CRTS AFFECTED) | REFILL THE AFFECTED CRT WITH COOLING LIQUID WHICH HAS EVAPORATED. (REFILL WITH DISTILLED WATER) | |
| PHILIPS | N/A | PTV365 | LOW OR NO AUDIO FROM ONE OR BOTH CHANNELS | CHECK Q203 AND Q204 (FET) STEREO AMP. BOARD | |
| PHILIPS | N/A | PTV365 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV365 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV370 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV370 | DISTORTED AUDIO AND TEARING IN THE PICTURE (ONLY AFFECTS THE MODELS WITH THE 2.5 WATT AUDIO AMPLIFIER) | REMOVE C190 (SURFACE MOUNT) | |
| PHILIPS | N/A | PTV370 | DEAD SET - NO CLICK BUT HAS A SLIGHT SCREECH OR SQUEAL FROM POWER SUPPLY AREA. | CHECK/REPLACE Q501 FOR SHORT (2SD1650) | |
| PHILIPS | N/A | PTV370 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV370 | TOTAL LOSS OF OSD | INSTALL 4.7k BETWEEN PINS #5 & #8 ON IC308 | |
| PHILIPS | N/A | PTV375 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV375 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV375 | RETRACE LINES AT THE BOTTOM OF THE PICTURE - ALSO MAY HAVE A VERTICAL ROLL AFTER WARM. | CHECK/REPLACE R553 FOR OPEN | |
| PHILIPS | N/A | PTV375 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV375 | VERTICAL JITTER ON SOME CABLE CHANNEL (USUALLY PREMIUM) | CHANGE R267 TO A 27K | |
| PHILIPS | N/A | PTV375 | TOTAL LOSS OF OSD | INSTALL 4.7k BETWEEN PINS 5&8 OF IC308 - SOLDER RESISTOR TO LEADS OF L307 AND L335. | |
| PHILIPS | N/A | PTV375 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV375 | CONVERGENCE OPTION DOESN'T COME UP IN THE MENU | CHECK CONNECTIONS AT J507,J510,J608,J509,CONVERGENCE POWER BOARD OR CONVERGENCE WAVEFORM MODULE | |
| PHILIPS | N/A | PTV376 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV376 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV376 | PICTURE SHIFTED TO THE RIGHT 4' AND NO ON-SCREEN DISPLAY | CHECK/REPLACE R524 AND C525 (SMD) FOR SHORT | |
| PHILIPS | N/A | PTV376 | TOTAL LOSS OF OSD | INSTALL 4.7k BETWEEN PINS #5 & #8 ON IC308 | |
| PHILIPS | N/A | PTV376 | DISTORTED AUDIO AND TEARING IN THE PICTURE (ONLY AFFECTS THE MODELS WITH THE 2.5 WATT AUDIO AMPLIFIER) | REMOVE C190 (SURFACE MOUNT) | |
| PHILIPS | N/A | PTV376 | DEAD SET - NO CLICK BUT HAS A SLIGHT SCREECH OR SQUEAL FROM POWER SUPPLY AREA. | CHECK/REPLACE Q501 FOR SHORT (2SD1650) | |
| PHILIPS | N/A | PTV377 | DISTORTED AUDIO AND TEARING IN THE PICTURE (ONLY AFFECTS THE MODELS WITH THE 2.5 WATT AUDIO AMPLIFIER) | REMOVE C190 (SURFACE MOUNT) | |
| PHILIPS | N/A | PTV377 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV380 | TOTAL LOSS OF OSD | INSTALL 4.7k BETWEEN PINS 5&8 OF IC308 - SOLDER RESISTOR TO LEADS OF L307 AND L335. | |
| PHILIPS | N/A | PTV380 | POWER,+,- BUTTONS DO NOT WORK AT SET BUT REMOTE IS FINE | CHECK FOR A PINCHED ORANGE WIRE GOING TO CUSTOMER PANEL-W1 | |
| PHILIPS | N/A | PTV380 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILIPS | N/A | PTV380 | PICTURE IS SHIFTED 4 INCHES TO THE RIGHT - NO OSD | CHECK/REPLACE R524 AND C525 (SMD) SHORTED | |
| PHILIPS | N/A | PTV380 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV380 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV380 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV380 | PIP HAS NO HORZ. SYNC | CHECK REGISTER 21 FOR CORRECT VALUE (SHOULD BE 0E) - SEE p.17 OF SERVICE MANUAL | |
| PHILIPS | N/A | PTV380 | CONVERGENCE OPTION DOESN'T COME UP IN THE MENU | CHECK CONNECTIONS AT J507,J510,J608,J509,CONVERGENCE POWER BOARD OR CONVERGENCE WAVEFORM MODULE | |
| PHILIPS | N/A | PTV380 | VERTICAL JITTER ON SOME CABLE CHANNEL (USUALLY PREMIUM) | CHANGE R267 TO A 27K | |
| PHILIPS | N/A | PTV380 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV381 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV382 | INTERMITTENT RED - LOOSES RED | CHECK/RESOLDER CONNECTIONS ON Q801 ON RED CRT BOARD | |
| PHILIPS | N/A | PTV382 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV382 | DEAD SET - NO CLICK BUT HAS A SLIGHT SCREECH OR SQUEAL FROM POWER SUPPLY AREA. | CHECK/REPLACE Q501 FOR SHORT (2SD1650) | |
| PHILIPS | N/A | PTV382 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 (P/N# 483512287063) | |
| PHILIPS | N/A | PTV382 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV382 | DISTORTED AUDIO AND TEARING IN THE PICTURE (ONLY AFFECTS THE MODELS WITH THE 2.5 WATT AUDIO AMPLIFIER) | REMOVE C190 (SURFACE MOUNT) | |
| PHILIPS | N/A | PTV385 | TOTAL LOSS OF OSD | INSTALL 4.7k BETWEEN PINS 5&8 OF IC308 - SOLDER RESISTOR TO LEADS OF L307 AND L335. | |
| PHILIPS | N/A | PTV385 | VERTICAL JITTER ON SOME CABLE CHANNEL (USUALLY PREMIUM) | CHANGE R267 TO A 27K | |
| PHILIPS | N/A | PTV385 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV385 | CONVERGENCE OPTION DOESN'T COME UP IN THE MENU | CHECK CONNECTIONS AT J507,J510,J608,J509,CONVERGENCE POWER BOARD OR CONVERGENCE WAVEFORM MODULE | |
| PHILIPS | N/A | PTV385 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV385 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILIPS | N/A | PTV385 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV386 | DISTORTED AUDIO AND TEARING IN THE PICTURE (ONLY AFFECTS THE MODELS WITH THE 2.5 WATT AUDIO AMPLIFIER) | REMOVE C190 (SURFACE MOUNT) | |
| PHILIPS | N/A | PTV386 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV386 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV392 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV392 | CONVERGENCE OPTION DOESN'T COME UP IN THE MENU | CHECK CONNECTIONS AT J507,J510,J608,J509,CONVERGENCE POWER BOARD OR CONVERGENCE WAVEFORM MODULE | |
| PHILIPS | N/A | PTV392 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV392 | TOTAL LOSS OF OSD | INSTALL 4.7k BETWEEN PINS 5&8 OF IC308 - SOLDER RESISTOR TO LEADS OF L307 AND L335. | |
| PHILIPS | N/A | PTV392 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV392 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV392 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILIPS | N/A | PTV392 | VERTICAL JITTER ON SOME CABLE CHANNEL (USUALLY PREMIUM) | CHANGE R267 TO A 27K | |
| PHILIPS | N/A | PTV395 | DEAD SET | CHECK/REPLACE Q501 (483513047061) | |
| PHILIPS | N/A | PTV395 | SET SHUTS DOWN AT NORMAL VIEWING LEVELS | CHECK FOR A BROKEN CONNECTION ON THE ABL LINE AT J406 AND J10 | |
| PHILIPS | N/A | PTV395 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
| PHILIPS | N/A | PTV395 | CONVERGENCE OPTION DOESN'T COME UP IN THE MENU | CHECK CONNECTIONS AT J507,J510,J608,J509,CONVERGENCE POWER BOARD OR CONVERGENCE WAVEFORM MODULE | |
| PHILIPS | N/A | PTV395 | DARK LINE TO THE LEFT OF THE COLOR PIP IMAGE RUNNING THE HEIGHT OF THE PIP BORDER | CHECK/REPLACE THE PIP MODULE | |
| PHILIPS | N/A | PTV395 | DEAD SET AND POWER INDICATOR LIGHTS UPON PLUG IN - NO RELAY ACTIVITY - OR VIDEO NOISE IN PICTURE WHEN USING THE TUNER | CHECK/REPLACE C360 (470uF @ 25v) | |
| PHILIPS | N/A | PTV395 | VERTICAL JITTER ON SOME CABLE CHANNEL (USUALLY PREMIUM) | CHANGE R267 TO A 27K | |
| PHILIPS | N/A | PTV395 | TOTAL LOSS OF OSD | INSTALL 4.7k BETWEEN PINS 5&8 OF IC308 - SOLDER RESISTOR TO LEADS OF L307 AND L335. | |
| PHILIPS | N/A | PTV400 | TICKING IN THE LEFT AUDIO CHANNEL COMING FROM THE uPROC COMMUNICATIONS BUSS | REMOVE B61 JUMPER AND REPLACE IT WITH A 330 ohm RESISTOR | |
| PHILIPS | N/A | PTV400 | NO AUDIO | CHECK/RESOLDER CONNECTIONS ON J620 PIN 5 & 6 - PLUG ITSELF | |
| PHILIPS | N/A | PTV400 | PIP FUNCTIONS FAIL TO OPERATE | CHECK/REPLACE Y415 ON PIP BOARD | |
| PHILIPS | N/A | PTV410 | TICKING IN THE LEFT AUDIO CHANNEL COMING FROM THE uPROC COMMUNICATIONS BUSS | REMOVE B61 JUMPER AND REPLACE IT WITH A 330 ohm RESISTOR | |
| PHILIPS | N/A | PTV410 | NO AUDIO | CHECK/RESOLDER CONNECTIONS ON J620 PIN 5 & 6 - PLUG ITSELF | |
| PHILIPS | N/A | PTV410 | ARCING FROM THE ANODE LEAD ON BLUE CRT | CHECK/REPLACE ANODE LEAD WITH P/N# 483531057161 | |
| PHILIPS | N/A | PTV410 | NO VIDEO OR NO AUDIO | CHECK/RESOLDER CONNECTIONS ON P620 AND/OR J620 | |
| PHILIPS | N/A | PTV415 | NO VIDEO OR NO AUDIO | CHECK/RESOLDER CONNECTIONS ON P620 AND/OR J620 | |
| PHILIPS | N/A | PTV420 | NO VIDEO OR NO AUDIO | CHECK/RESOLDER CONNECTIONS ON P620 AND/OR J620 | |
| PHILIPS | N/A | PTV420 | NO COLOR PIP FUNCTIONS | CHECK/REPLACE PIP MODULE (P/N# APP006A022) OR Y415 CRYSTAL WHICH IS THE PROBLEM (P/N# 483524277159) | |
| PHILIPS | N/A | PTV420 | NO AUDIO | CHECK/RESOLDER CONNECTIONS ON J620 PIN 5 & 6 - PLUG ITSELF | |
| PHILIPS | N/A | PTV425 | TICKING IN THE LEFT AUDIO CHANNEL COMING FROM THE uPROC COMMUNICATIONS BUSS | REMOVE B61 JUMPER AND REPLACE IT WITH A 330 ohm RESISTOR | |
| PHILIPS | N/A | PTV425 | ARCING FROM THE ANODE LEAD ON BLUE CRT | CHECK/REPLACE ANODE LEAD WITH P/N# 483531057161 | |
| PHILIPS | N/A | PTV425 | NO AUDIO | CHECK/RESOLDER CONNECTIONS ON J620 PIN 5 & 6 - PLUG ITSELF | |
| PHILIPS | N/A | PTV425 | NO VIDEO OR NO AUDIO | CHECK/RESOLDER CONNECTIONS ON P620 AND/OR J620 | |
| PHILIPS | N/A | PTV430 | NO COLOR PIP FUNCTIONS | CHECK/REPLACE PIP MODULE (P/N# APP006A022) OR Y415 CRYSTAL WHICH IS THE PROBLEM (P/N# 483524277159) | |
| PHILIPS | N/A | PTV430 | NO VIDEO OR NO AUDIO | CHECK/RESOLDER CONNECTIONS ON P620 AND/OR J620 | |
| PHILIPS | N/A | PTV500 | POOR CONVERGENCE - WILL NOT ADJUST | CHECK/REPLACE ALL FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV500 | NO SOUND BUT PICTURE IS NORMAL | CHECK/REPLACE IC204 (P/N# LA4270) AND L412 | |
| PHILIPS | N/A | PTV510 | POOR CONVERGENCE - WILL NOT ADJUST | CHECK/REPLACE ALL FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV510 | NO SOUND BUT PICTURE IS NORMAL | CHECK/REPLACE IC204 (P/N# LA4270) AND L412 | |
| PHILIPS | N/A | PTV510 | POOR CONVERGENCE - MISSING -11 VOLTS TO CONVERGENCE BOARD | CHECK/REPLACE R2802 AND R2803 (0.12 1/3w.) ON DEFLECTION BOARD - ALSO CHECK FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV512 | NO SOUND BUT PICTURE IS NORMAL | CHECK/REPLACE IC204 (P/N# LA4270) AND L412 | |
| PHILIPS | N/A | PTV512 | POOR CONVERGENCE - MISSING -11 VOLTS TO CONVERGENCE BOARD | CHECK/REPLACE R2802 AND R2803 (0.12 1/3w.) ON DEFLECTION BOARD - ALSO CHECK FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV512 | POOR CONVERGENCE - WILL NOT ADJUST | CHECK/REPLACE ALL FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV515 | POOR CONVERGENCE - MISSING -11 VOLTS TO CONVERGENCE BOARD | CHECK/REPLACE R2802 AND R2803 (0.12 1/3w.) ON DEFLECTION BOARD - ALSO CHECK FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV515 | NO SOUND BUT PICTURE IS NORMAL | CHECK/REPLACE IC204 (P/N# LA4270) AND L412 | |
| PHILIPS | N/A | PTV515 | POOR CONVERGENCE - WILL NOT ADJUST | CHECK/REPLACE ALL FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV520 | POOR CONVERGENCE - WILL NOT ADJUST | CHECK/REPLACE ALL FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV520 | NO SOUND BUT PICTURE IS NORMAL | CHECK/REPLACE IC204 (P/N# LA4270) AND L412 | |
| PHILIPS | N/A | PTV520 | POOR CONVERGENCE - MISSING -11 VOLTS TO CONVERGENCE BOARD | CHECK/REPLACE R2802 AND R2803 (0.12 1/3w.) ON DEFLECTION BOARD - ALSO CHECK FUSES ON CONVERGENCE BOARD | |
| PHILIPS | N/A | PTV525 | NO SOUND BUT PICTURE IS NORMAL | CHECK/REPLACE IC204 (P/N# LA4270) AND L412 |
|
LAMSON
Digital Electronics Address: 1324-1326 Jose Abad Santos Ave.,Manila, Philippines TEL:00632-2559675 TEL/FAX:00632-2568130 Cellular:0922-8867809 0922-8867810 E-mail:[email protected]
YAHOO MESSENGER ID : myrna_q_ng or saishu_ng (old) Lamson Importers & Exporters Trading <We will not be
using the old address and phone no. in the future. Please be
noted when calling us, sending letters, parcels or buying our products>
|
